Mx

MMSx Authority Institute · Posture Science LMS

MSc-level learning modules · interactive HTML · CC BY 4.0
MSc Posture Science Module 22/24

Global Coronal Alignment

The Whole-Body Frontal Plumb Line — Coronal Balance, Pelvic Obliquity & the Side-to-Side Compensation Cascade

R EGION XIV · INTEGRATIVE · GLOBAL CORONAL / FRONTAL-PLANE ALIGNMENT · Source: Posture Science Reference Cards ALL 24.pdf, pages 43-44.

Orientation and module identity

Global Coronal Alignment is an MSc-level learning module derived from the MMSx Postural Science Reference Cards. It expands the source card into a structured learning sequence for postgraduate posture science, clinical biomechanics, corrective exercise and movement decision science.

Module22 of 24
RegionR EGION XIV · INTEGRATIVE · GLOBAL CORONAL / FRONTAL-PLANE ALIGNMENT
Study format16 LMS screens · print-ready
Source pages43–44 from uploaded card PDF
MMSx framing: Posture is taught here as applied mechanics: force, torque, load line, neuromuscular control, tissue tolerance and re-testable correction. The learner should not memorise a shape; the learner should reason from driver to cascade to measurable change. [1] [2] [3] [4]

Module subtitle: The Whole-Body Frontal Plumb Line — Coronal Balance, Pelvic Obliquity & the Side-to-Side Compensation Cascade

Academic abstract and scope

This module converts the compact two-page reference card into a deeper MSc teaching unit. The source card gives the ideal regional state, a three-grade biomechanical cascade, assessment thresholds, BPIT™ correction sequence, key biomechanical evidence and reference figure requirements. The expanded module keeps those elements intact and adds learning activities, case reasoning, decision tiers and citation review.

The scope is deliberately postgraduate. Learners are expected to distinguish alignment description from clinical causation, to avoid overclaiming from static posture alone, and to use repeated measurement before and after intervention. The key question throughout the module is: what mechanical driver is loading the chain, how strong is the evidence, and what measurable outcome proves that the correction helped?

Authenticity rule: Every intervention decision must be traceable to a driver, a test, a cascade grade and a re-test. When the painful site is not the driver, correction should begin where the chain is being mechanically governed.
Card identity and regional title — source-card excerpt
P O S T U R A L S C I E N C E R E F E R E N C E C A R D · S E R I E S 2 2 O F 2 4 R EGION XIV · INTEGRATIVE · GLOBAL CORONAL / FRONTAL-PLANE ALIGNMENT Global Coronal Alignment The Whole-Body Frontal Plumb Line — Coronal Balance, Pelvic Obliquity & the Side-to-Side Compensation Cascade

Learning outcomes and prerequisite knowledge

After completing this module, the learner should be able to perform an MSc-level interpretation of Global Coronal Alignment using source-card metrics and MMSx mechanical reasoning.

Outcome domainSpecific competencyEvidence of mastery
Conceptual biomechanicsExplain the ideal regional state and why it changes load distribution.Can teach the criterion without turning it into a rigid cosmetic rule.
Clinical reasoningClassify Grade 1, Grade 2 and Grade 3 presentations from the cascade.Can justify escalation, de-escalation and referral.
AssessmentSelect and sequence the six source-card assessments.Can record normal/target, threshold and re-test value.
Correction designApply BPIT™ Line 1–5 without skipping driver confirmation.Can build a safe first-session and progression plan.
Evidence appraisalUse module references to support claims and identify limits.Can separate measured findings from hypotheses.
Prerequisites: musculoskeletal anatomy, basic vector mechanics, goniometry/photogrammetry, pain-screening principles, progressive loading and professional referral boundaries.

Ideal criteria: what “neutral” means in this region

The source card defines the ideal state as a cluster of criteria rather than one single posture. In MSc teaching, this is important because a single landmark can be misleading if surrounding load, control and tolerance are not also examined.

Neutral criterion / card lineBiomechanical meaningMeasurement discipline
The biomechanical-neutral whole-body frontal plumb line — six defining criteriaRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
CORONAL BALANCERepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
C7 plumb over centralRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
sacral vertical line²·³Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
CSVL < 30 mmRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
CORONAL CURVERepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
No structural frontal-Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
plane curve⁵Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Cobb < 10°Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
SHOULDER LEVELRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Shoulders level in theRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
frontal plane⁹Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Teaching interpretation: use the ideal criteria as an assessment map. When two or more criteria fail together, the probability that this is a meaningful mechanical pattern increases; when one criterion fails alone, confirm with history, symptoms, movement testing and re-test response.
Ideal-position source excerpt — source-card excerpt
The biomechanical-neutral whole-body frontal plumb line — six defining criteria CORONAL BALANCE C7 plumb over central sacral vertical line²·³ CSVL < 30 mm CORONAL CURVE No structural frontal- plane curve⁵ Cobb < 10° SHOULDER LEVEL Shoulders level in the frontal plane⁹ Level PELVIC LEVEL Iliac crests level · no obliquity⁶ Level LEG LENGTH Functionally equal leg length⁷·⁸ Symmetric LOAD SYMMETRY Weight shared evenly through both feet⁹ Even

Regional anatomy and mechanical model

The anatomical model for Global Coronal Alignment should be taught as an interaction between passive structures, active force couples and neural control. The module therefore uses a three-subsystem model: the passive subsystem provides joint geometry and connective-tissue limits; the active subsystem supplies force production and stiffness modulation; the neural subsystem controls timing, threat response and task-specific strategy. [1] [2] [3] [4]

Passive subsystemjoint surface, ligament, capsule, bone shape, arch/curve or alignment geometry
Active subsystemlocal stabilisers, global movers, force couples, endurance capacity
Neural subsystemmotor planning, proprioception, pain modulation, balance and reflex control

In this region, the practical question is not whether the body looks perfect. The practical question is whether the observed alignment is loading tissues beyond current tolerance, creating compensations in adjacent regions, or preventing efficient movement during real tasks.

MSc discussion prompt: Which parts of the source card are direct measurements, which are clinical inferences, and which require cross-checking against another region?

Force vectors, moments and load-graph interpretation

The source card uses regional thresholds and graded cascades to show how posture becomes clinically meaningful when it changes force direction, moment arm, shear, compression or neuromuscular demand. The graph below is not a diagnostic equation; it is a teaching model for the escalation logic.

Clinical complexityCascade gradeGrade 1Grade 2Grade 3reversiblecompensatedchain disruption
Mechanical variableHow to teach itWhy it matters
Force directionWhere is the load being driven?Determines whether tissue is compressed, tensioned, sheared or rotated.
Moment armHow far is the load line from the joint or segment?Small positional changes can multiply muscular demand.
Control timingDoes the stabiliser activate before the load arrives?Delayed or substituted control increases compensation risk.
Dose and toleranceHow often and how long is the region loaded?A mild fault can become important when repeated for months.
Key biomechanical facts from source card — source-card excerpt
Coronal malalignment has its own classification and surgical logic distinct from the sagittal plane — frontal balance is not merely a by-product of sagittal shape Obeid I, et al. Eur Spine J. 2019;28(1):94–113.¹ Coronal imbalance is common in degenerative lumbar scoliosis and independently influences decision-making — the C7–CSVL offset matters clinically Bao H, et al. Eur Spine J. 2016;25(8):2617–2625.² Leg-length inequality tilts the pelvis and alters spinal posture — a base-of-support asymmetry propagates upward through the frontal plane Betsch M, et al. Eur Spine J. 2013;22(6):1354–1361.⁶ Leg-length discrepancy alters gait and load distribution — its functional effect, not just the millimetres, guides management Gurney B. Gait Posture. 2002;15(2):195–206.⁷ The Cobb angle remains the reference standard for quantifying a frontal-plane curve — a reproducible measure that stratifies structural deformity Cobb JR. Instr Course Lect. 1948;5:261–275.⁵ Coronal-imbalance type predicts postoperative outcome — the direction and rigidity of the shift carry prognostic weight Bao H, et al. Spine J. 2019;19(4):646–654.¹²

Grade 1 cascade: mild, reversible and locally manageable

Grade 1 is the zone where a mechanical fault is detectable but usually still reversible. The goal is to confirm that the finding is real, prevent over-treatment, and correct the earliest driver before the chain starts to compensate.

Grade 1 teaching focus

Low complexity, early driver, minimal compensation, likely responsive to education, mobility/control work and re-testable loading.

Watch transition

Escalation begins when the same driver persists under daily dose, fatigue or poor recovery.

Avoid delay

Do not let a simple regional finding become fixed by ignoring red flags, neurological signs or progressive loss.

Clinical reasoning: Grade 1 does not mean “no problem”. It means the problem should be approached with precise, conservative correction and measurement. A credible practitioner avoids dramatic claims and proves change through baseline and re-test.

Grade 2 cascade: compensated regional-chain pattern

Grade 2 describes the middle zone: the fault is no longer merely local, and compensation is detectable in adjacent tissues, control strategies or movement behaviour. In this zone, the clinician must confirm whether the painful region is the driver or only the site of accumulated load.

Grade 2 riskWhat the learner should checkCorrection implication
Compensation becomes protectiveDoes the patient guard, shift, rotate, brace or avoid?Restore mechanical options before loading intensity.
Motor substitutionAre global muscles doing local stabiliser work?Re-educate control before endurance or power goals.
Measurement driftDo objective values cross card thresholds?Use thresholds to justify progression or regression.
Decision standard: A Grade 2 module plan must include a driver test, a correction target and at least one objective re-test marker from the source card.

Grade 3 cascade: chain disruption, referral logic and complex care

Grade 3 is the high-complexity tier. The source-card language generally describes severe deviation, structural adaptation, major chain consequence, neurological involvement, fixed deformity or significant loss of function. This is where credibility depends on restraint: not every Grade 3 presentation belongs in exercise correction alone.

Professional boundary: Grade 3 findings should trigger red-flag review, medical history review, imaging/referral consideration where indicated, and staged co-management. Correction is not cancelled, but it becomes subordinate to safety and diagnosis.
Source cascade lineTeaching interpretation
How coronal offset recruits the side-to-side compensation chain — stratified by coronal balance & plumb-shift severityMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 1Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Balanced · CSVL < 30 mmMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Mild · ReversibleMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 2Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Compensated shiftMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Moderate · CompensatedMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 3Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Decompensated / fixedMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Severe · Chain DisruptionMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
PRIMARYMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
DRIVERMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Mild frontal asymmetry · C7 plumb nearMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
midline¹·²Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Coronal shift emerging · recruited side-to-sideMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
compensation²·⁴Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.

MSc synthesis: In Grade 3, the question changes from “which exercise fixes this?” to “what is the safest sequence of confirmation, referral, load management, symptom protection, mechanical re-education and long-term re-test?”

Clinical assessment protocol and threshold discipline

The source card lists validated or clinically repeatable tests. The MSc standard is to treat each test as a data point with method, side, value, symptom response, reliability and re-test timing. Do not use a single postural snapshot to claim causation.

Assessment / source elementMSc interpretationDecision use
Six validated tests · Normal values · MDC thresholds · Red-flag screenUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Screen/referral
ASSESSMENTUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Screen/referral
METHOD / TOOLUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
NORMAL /Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
TARGETUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
CLINICALUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
THRESHOLDUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
Coronal balanceUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
C7 plumb to CSVL (APUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
film)²·³Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
< 30 mmUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
> 30–40 mm =Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
Data-capture rule: write the baseline value, the target/normal value, the clinical threshold, and the immediate post-correction value. This makes the module teachable, auditable and clinically defensible.
Assessment source excerpt — source-card excerpt
Six validated tests · Normal values · MDC thresholds · Red-flag screen ASSESSMENT METHOD / TOOL NORMAL / TARGET CLINICAL THRESHOLD Coronal balance C7 plumb to CSVL (AP film)²·³ < 30 mm > 30–40 mm = imbalance² Coronal Cobb AP radiograph⁵ < 10° > 10° = structural curve⁵ Pelvic obliquity Iliac-crest level / AP film⁶ Level Tilt = obliquity / LLD⁶ Leg-length ASIS–malleolus / block test⁷·⁸ Symmetric > 10 mm = significant LLD⁷ Shoulder level Photographic / plumb⁹ Level Tilt = compensation⁹ Curve flexibility Side-bend / traction film¹³ Flexible Rigid = structural¹³

Red flags, exclusion criteria and referral before correction

Posture education is only credible when the safety screen comes before the correction plan. Red flags in the source cards are not decorative; they define when the module must stop and referral or co-management must occur.

Source-card red flags

  • Rapidly progressive frontal curve in a child / adolescent — progressive idiopathic scoliosis (refer specialist)
  • New coronal collapse after low-energy trauma — osteoporotic vertebral fracture (image)
  • Curve + neurological signs / abnormal reflexes — cord or intraspinal pathology (urgent imaging)
  • Progressive deformity + night pain, weight loss, malignancy history — tumour / metastasis screen
  • Deformity + fever, raised inflammatory markers — spinal infection / discitis (emergency)
Safety tierActionDocumentation
EmergencyStop correction and refer urgently.Record symptom, onset, neurological/systemic signs and referral advice.
Medical workupDo not load aggressively until diagnosis or clearance.Record rationale and communication.
Conservative correction allowedProceed only when red flags are negative and driver is confirmed.Record baseline, intervention and re-test.

BPIT™ 5-Line correction sequence

The BPIT™ sequence is the correction spine of the LMS. It keeps the practitioner from jumping directly to exercises before confirming the mechanical driver. In every module, the order is: identify the driver, restore the missing mechanical option, activate control, load the corrected pattern, and habituate it into life or sport.

Line 1: Identify Driver

Identify Driver NEEBAL™ 3-gate test · measure C7–CSVL offset & screen leg- length / curve · classify per Obeid &

Line 2: Restore Mobility

Bao coronal types¹·²·⁷ Line 2 Address Base Correct the frontal base — level the

Line 3: Activate Control

pelvis, address leg-length inequality (heel-lift trial) & unilateral tightness⁶·⁷·⁸ Line 3

Line 4: Load & Correct

Activate Frontal Frontal-plane trunk & hip-abductor re-education to control lateral trunk shift & hold shoulders level over the

Line 5: Habituate

pelvis⁹ Line 4 Load & Correct Progressive symmetric loading & gait

Correction rule: If Line 1 is wrong, Lines 2–5 may improve symptoms temporarily while missing the source of recurrence. Driver confirmation is therefore the credibility anchor of the method.
BPIT correction source excerpt — source-card excerpt
Identify Driver NEEBAL™ 3-gate test · measure C7–CSVL offset & screen leg- length / curve · classify per Obeid & Bao coronal types¹·²·⁷ Line 2 Address Base Correct the frontal base — level the pelvis, address leg-length inequality (heel-lift trial) & unilateral tightness⁶·⁷·⁸ Line 3 Activate Frontal Frontal-plane trunk & hip-abductor re-education to control lateral trunk shift & hold shoulders level over the pelvis⁹ Line 4 Load & Correct Progressive symmetric loading & gait retraining · confirm the C7 plumb re- centres & load evens between limbs · re-test³·¹² Line 5 Habituate Symmetric standing / loading habit & footwear correction · flag rigid or progressive curves for specialist review¹·¹³ Evidence: coronal balance & outcome¹¹·¹² Evidence: leg-length & pelvis⁶·⁷ Classification: Obeid / Bao¹·² BPIT™ DOI 10.5281/zenodo.17594977

Figure laboratory and illustration placeholder

GLOBAL CORONAL — Frontal Plumb &

Replaceable file: figures/POST-CARD-22-GLOBAL-CORONAL-FIGURE.jpg

The original card specifies a 4 × 6 inch portrait anatomical plate. This LMS package includes a same-name JPG placeholder that can be replaced by the final illustration without editing the HTML.

Figure requirementModule instruction
FilenamePOST-CARD-22-GLOBAL-CORONAL-FIGURE.jpg
Original AI filenamePOST-CARD-22-GLOBAL-CORONAL-FIGURE.ai
Figure titleGLOBAL CORONAL — Frontal Plumb &
Design noteshow the whole-body AP frontal plumb line with the C7 plumb and CSVL, and the side-to-side compensation — pelvic obliquity from leg- length inequality driving trunk shift & shoulder tilt — annotating the C7– CSVL offset and coronal Cobb in house gold, contrasting a level balanced stance against a decompensated coronal lean.
Figure placeholder source excerpt — source-card excerpt
ILLUSTRATION PLACEHOLDER — HUMAN FIGURE 4 × 6 inch · 102 mm × 152 mm · 300 dpi · line-art + house colours GLOBAL CORONAL — Frontal Plumb & Obliquity · Full-body AP · head-to-heel frontal plumb line · C7 plumb & central sacral vertical line (CSVL) · Coronal offset measurement (C7–CSVL) · Shoulder-level & pelvic-level lines · Pelvic obliquity from leg-length inequality · Compensatory trunk shift / shoulder tilt · Coronal Cobb-angle construction

Case application: driver-first reasoning lab

This case laboratory turns the reference card into a teachable clinical workflow. Use it for student discussion, practical assessment or website-based continuing education.

Select values to generate a decision tier.
  1. Screen: rule out the source-card red flags.
  2. Measure: take the most repeatable test from the assessment protocol.
  3. Locate: decide whether this region is the driver, a compensation or a consequence.
  4. Correct: apply BPIT™ in sequence.
  5. Re-test: confirm change with the same measure and a functional task.
Student task: Write a one-paragraph decision note: “The primary driver appears to be ___ because ___; the grade is ___ because ___; the first correction target is ___; the re-test marker is ___.”

Flowchart, knowledge check and application quiz

The flowchart below summarises the LMS logic. It is intentionally the same across modules so learners can build a consistent MMSx decision habit while adapting the details to each anatomical region.

Screenred flags firstLocatedriver regionGrade1 · 2 · 3CorrectBPIT 5-LineRe-testGlobal Coronal Alignment: change the mechanics, then prove the change with re-testing.
Question 1. Why is driver confirmation required before correction?
Because symptoms may appear at a compensation site. Correction should target the region generating the mechanical fault, then verify change with re-testing.
Question 2. What makes a Grade 2 presentation different from Grade 1?
Grade 2 shows more measurable deviation and compensation across adjacent control or load systems; it demands stronger assessment, correction sequencing and monitoring.
Question 3. When should this module stop and refer?
When any source-card red flag is present, when neurological/systemic signs emerge, or when Grade 3 features require diagnostic clarification before loading.

References, citations and authenticity audit trail

Source: Posture Science Reference Cards ALL 24.pdf, pages 43-44. The references below were extracted and normalised from the module’s source card. Keep them visible on the website so every module carries its own citation trail.

Module references

  1. [1] Obeid I, et al. (2019). Coronal malalignment in adult spinal deformity: definitions, classification and surgical planning. Eur Spine J, 28(1), 94–113.
  2. [2] Bao H, et al. (2016). Coronal imbalance in degenerative lumbar scoliosis: prevalence and influence on surgical decision-making. Eur Spine J, 25(8), 2617–2625.
  3. [3] Ploumis A, et al. (2015). Coronal spinal balance in adult spine deformity following long segmental fusion. J Spinal Disord Tech, 28(9), 341–347.
  4. [4] Gottfried ON, et al. (2009). Coronal and sagittal balance in the setting of adult spinal deformity. Neurosurg Focus, 27(1), e3.
  5. [5] Cobb JR. (1948). Outline for the study of scoliosis. Instr Course Lect, 5, 261–275.
  6. [6] Betsch M, et al. (2013). Influence of leg-length inequality on pelvic position and spinal posture. Eur Spine J, 22(6), 1354–1361.
  7. [7] Gurney B. (2002). Leg-length discrepancy. Gait Posture, 15(2), 195–206.
  8. [8] Knutson GA. (2005). Anatomic and functional leg-length inequality: a review and recommendation for clinical decision-making. Chiropr Osteopat, 13, 11.
  9. [9] Kendall FP, et al. (2005). Muscles: Testing and Function with Posture and Pain (5th ed.). Lippincott Williams & Wilkins.
  10. [10] Roussouly P, Nnadi C. (2010). Sagittal plane deformity: an overview of interpretation and management. Eur Spine J, 19(11), 1824–1836.
  11. [11] Schwab F, et al. (2006). Adult scoliosis: a health assessment analysis by SF-36. Spine, 31(18), 2109– 2114.
  12. [12] Bao H, et al. (2019). Coronal imbalance classification of degenerative scoliosis and postoperative outcomes. Spine J, 19(4), 646–654.
  13. [13] Daffner SD, Vaccaro AR. (2003). Adult degenerative lumbar scoliosis. Am J Orthop, 32(2), 77–82.

Evidence facts carried into this module

  • Coronal malalignment has its own classification and surgical logic distinct from the sagittal
  • plane — frontal balance is not merely a by-product of sagittal shape
  • Obeid I, et al. Eur Spine J. 2019;28(1):94–113.¹
  • Coronal imbalance is common in degenerative lumbar scoliosis and independently influences
  • decision-making — the C7–CSVL offset matters clinically
  • Bao H, et al. Eur Spine J. 2016;25(8):2617–2625.²
  • Leg-length inequality tilts the pelvis and alters spinal posture — a base-of-support asymmetry
  • propagates upward through the frontal plane
  • Betsch M, et al. Eur Spine J. 2013;22(6):1354–1361.⁶
  • Leg-length discrepancy alters gait and load distribution — its functional effect, not just the
  • millimetres, guides management
  • Gurney B. Gait Posture. 2002;15(2):195–206.⁷
  • The Cobb angle remains the reference standard for quantifying a frontal-plane curve — a
  • reproducible measure that stratifies structural deformity
  • Cobb JR. Instr Course Lect. 1948;5:261–275.⁵
  • Coronal-imbalance type predicts postoperative outcome — the direction and rigidity of the
Credibility note: This LMS module is an educational synthesis, not a medical diagnosis. Before formal journal publication, verify bibliographic metadata, page ranges and DOI links against primary databases. For website education, the source-card citations and safety screens should remain visible.