Mx

MMSx Authority Institute · Posture Science LMS

MSc-level learning modules · interactive HTML · CC BY 4.0
MSc Posture Science Module 17/24

The Hip — Femoroacetabular Joint

The Deep Ball-and-Socket — Femoral-Head Centring, Gluteal Force-Couple & the Impingement–Instability Cascade

R EGION IX · HIP · FEMOROACETABULAR JOINT & GLUTEAL FORCE-COUPLE · Source: Posture Science Reference Cards ALL 24.pdf, pages 33-34.

Orientation and module identity

The Hip — Femoroacetabular Joint is an MSc-level learning module derived from the MMSx Postural Science Reference Cards. It expands the source card into a structured learning sequence for postgraduate posture science, clinical biomechanics, corrective exercise and movement decision science.

Module17 of 24
RegionR EGION IX · HIP · FEMOROACETABULAR JOINT & GLUTEAL FORCE-COUPLE
Study format16 LMS screens · print-ready
Source pages33–34 from uploaded card PDF
MMSx framing: Posture is taught here as applied mechanics: force, torque, load line, neuromuscular control, tissue tolerance and re-testable correction. The learner should not memorise a shape; the learner should reason from driver to cascade to measurable change. [1] [2] [3] [4]

Module subtitle: The Deep Ball-and-Socket — Femoral-Head Centring, Gluteal Force-Couple & the Impingement–Instability Cascade

Academic abstract and scope

This module converts the compact two-page reference card into a deeper MSc teaching unit. The source card gives the ideal regional state, a three-grade biomechanical cascade, assessment thresholds, BPIT™ correction sequence, key biomechanical evidence and reference figure requirements. The expanded module keeps those elements intact and adds learning activities, case reasoning, decision tiers and citation review.

The scope is deliberately postgraduate. Learners are expected to distinguish alignment description from clinical causation, to avoid overclaiming from static posture alone, and to use repeated measurement before and after intervention. The key question throughout the module is: what mechanical driver is loading the chain, how strong is the evidence, and what measurable outcome proves that the correction helped?

Authenticity rule: Every intervention decision must be traceable to a driver, a test, a cascade grade and a re-test. When the painful site is not the driver, correction should begin where the chain is being mechanically governed.
Card identity and regional title — source-card excerpt
P O S T U R A L S C I E N C E R E F E R E N C E C A R D · S E R I E S 1 7 O F 2 4 R EGION IX · HIP · FEMOROACETABULAR JOINT & GLUTEAL FORCE-COUPLE The Hip — Femoroacetabular Joint The Deep Ball-and-Socket — Femoral-Head Centring, Gluteal Force-Couple & the Impingement–Instability Cascade

Learning outcomes and prerequisite knowledge

After completing this module, the learner should be able to perform an MSc-level interpretation of The Hip — Femoroacetabular Joint using source-card metrics and MMSx mechanical reasoning.

Outcome domainSpecific competencyEvidence of mastery
Conceptual biomechanicsExplain the ideal regional state and why it changes load distribution.Can teach the criterion without turning it into a rigid cosmetic rule.
Clinical reasoningClassify Grade 1, Grade 2 and Grade 3 presentations from the cascade.Can justify escalation, de-escalation and referral.
AssessmentSelect and sequence the six source-card assessments.Can record normal/target, threshold and re-test value.
Correction designApply BPIT™ Line 1–5 without skipping driver confirmation.Can build a safe first-session and progression plan.
Evidence appraisalUse module references to support claims and identify limits.Can separate measured findings from hypotheses.
Prerequisites: musculoskeletal anatomy, basic vector mechanics, goniometry/photogrammetry, pain-screening principles, progressive loading and professional referral boundaries.

Ideal criteria: what “neutral” means in this region

The source card defines the ideal state as a cluster of criteria rather than one single posture. In MSc teaching, this is important because a single landmark can be misleading if surrounding load, control and tolerance are not also examined.

Neutral criterion / card lineBiomechanical meaningMeasurement discipline
The biomechanical-neutral deep ball-and-socket — six defining criteriaRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
HEAD CENTRINGRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Femoral head centred inRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
acetabulum by force-Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
couple³·⁷Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
CentredRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
BONY MORPHOLOGYRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
No cam / pincerRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
morphology — clearRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
head-neck offset¹·²Represents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Normal α-angleRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
LABRAL SEALRepresents the preferred load-distribution state for this region, not a cosmetic posture standard.Confirm with observation plus at least one objective or repeatable test before correction.
Teaching interpretation: use the ideal criteria as an assessment map. When two or more criteria fail together, the probability that this is a meaningful mechanical pattern increases; when one criterion fails alone, confirm with history, symptoms, movement testing and re-test response.
Ideal-position source excerpt — source-card excerpt
The biomechanical-neutral deep ball-and-socket — six defining criteria HEAD CENTRING Femoral head centred in acetabulum by force- couple³·⁷ Centred BONY MORPHOLOGY No cam / pincer morphology — clear head-neck offset¹·² Normal α-angle LABRAL SEAL Intact labrum maintains suction seal¹¹ Sealed RANGE OF MOTION Full flexion, internal rotation & extension⁹ Flex ≈ 120° · IR ≈ 35° GLUTEAL FORCE- COUPLE Glutes balance flexor / adductor pull⁸·¹⁰ Balanced LOAD PROTECTION Hip absorbs & drives load · spares spine / knee³ Protective

Regional anatomy and mechanical model

The anatomical model for The Hip — Femoroacetabular Joint should be taught as an interaction between passive structures, active force couples and neural control. The module therefore uses a three-subsystem model: the passive subsystem provides joint geometry and connective-tissue limits; the active subsystem supplies force production and stiffness modulation; the neural subsystem controls timing, threat response and task-specific strategy. [1] [2] [3] [4]

Passive subsystemjoint surface, ligament, capsule, bone shape, arch/curve or alignment geometry
Active subsystemlocal stabilisers, global movers, force couples, endurance capacity
Neural subsystemmotor planning, proprioception, pain modulation, balance and reflex control

In this region, the practical question is not whether the body looks perfect. The practical question is whether the observed alignment is loading tissues beyond current tolerance, creating compensations in adjacent regions, or preventing efficient movement during real tasks.

MSc discussion prompt: Which parts of the source card are direct measurements, which are clinical inferences, and which require cross-checking against another region?

Force vectors, moments and load-graph interpretation

The source card uses regional thresholds and graded cascades to show how posture becomes clinically meaningful when it changes force direction, moment arm, shear, compression or neuromuscular demand. The graph below is not a diagnostic equation; it is a teaching model for the escalation logic.

Clinical complexityCascade gradeGrade 1Grade 2Grade 3reversiblecompensatedchain disruption
Mechanical variableHow to teach itWhy it matters
Force directionWhere is the load being driven?Determines whether tissue is compressed, tensioned, sheared or rotated.
Moment armHow far is the load line from the joint or segment?Small positional changes can multiply muscular demand.
Control timingDoes the stabiliser activate before the load arrives?Delayed or substituted control increases compensation risk.
Dose and toleranceHow often and how long is the region loaded?A mild fault can become important when repeated for months.
Key biomechanical facts from source card — source-card excerpt
Femoroacetabular impingement — abnormal cam or pincer contact at end-range — is a mechanical cause of labral damage and hip osteoarthritis Ganz R, et al. Clin Orthop Relat Res. 2003;417:112–120.¹ FAI syndrome is defined by the triad of symptoms, clinical signs and imaging findings — morphology alone is not diagnosis (Warwick Agreement) Griffin DR, et al. Br J Sports Med. 2016;50(19):1169–1176.² The acetabular labrum forms a suction seal that pressurises joint fluid and protects cartilage — losing it changes load distribution Ferguson SJ, et al. Clin Biomech. 2003;18(6):512–518.¹¹ Patients with symptomatic FAI show measurable hip-muscle weakness — the deficit is neuromuscular as well as structural Casartelli NC, et al. Osteoarthritis Cartilage. 2011;19(7):816–821.¹⁰ Hip muscular action centres the femoral head and stabilises the joint through range — control, not just cartilage, governs load Neumann DA. J Orthop Sports Phys Ther. 2010;40(2):82–94.³ Clinical tests such as FADIR are sensitive for hip / labral pathology — a practical first-line screen for the intra-articular hip Reiman MP, et al. Br J Sports Med. 2015;49(12):811.⁵

Grade 1 cascade: mild, reversible and locally manageable

Grade 1 is the zone where a mechanical fault is detectable but usually still reversible. The goal is to confirm that the finding is real, prevent over-treatment, and correct the earliest driver before the chain starts to compensate.

Grade 1 teaching focus

Low complexity, early driver, minimal compensation, likely responsive to education, mobility/control work and re-testable loading.

Watch transition

Escalation begins when the same driver persists under daily dose, fatigue or poor recovery.

Avoid delay

Do not let a simple regional finding become fixed by ignoring red flags, neurological signs or progressive loss.

Clinical reasoning: Grade 1 does not mean “no problem”. It means the problem should be approached with precise, conservative correction and measurement. A credible practitioner avoids dramatic claims and proves change through baseline and re-test.

Grade 2 cascade: compensated regional-chain pattern

Grade 2 describes the middle zone: the fault is no longer merely local, and compensation is detectable in adjacent tissues, control strategies or movement behaviour. In this zone, the clinician must confirm whether the painful region is the driver or only the site of accumulated load.

Grade 2 riskWhat the learner should checkCorrection implication
Compensation becomes protectiveDoes the patient guard, shift, rotate, brace or avoid?Restore mechanical options before loading intensity.
Motor substitutionAre global muscles doing local stabiliser work?Re-educate control before endurance or power goals.
Measurement driftDo objective values cross card thresholds?Use thresholds to justify progression or regression.
Decision standard: A Grade 2 module plan must include a driver test, a correction target and at least one objective re-test marker from the source card.

Grade 3 cascade: chain disruption, referral logic and complex care

Grade 3 is the high-complexity tier. The source-card language generally describes severe deviation, structural adaptation, major chain consequence, neurological involvement, fixed deformity or significant loss of function. This is where credibility depends on restraint: not every Grade 3 presentation belongs in exercise correction alone.

Professional boundary: Grade 3 findings should trigger red-flag review, medical history review, imaging/referral consideration where indicated, and staged co-management. Correction is not cancelled, but it becomes subordinate to safety and diagnosis.
Source cascade lineTeaching interpretation
How femoral mis-centring & impingement propagate through the hip complex — stratified by impingement / instability severityMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 1Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Positional / load-onlyMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Mild · ReversibleMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 2Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Early impingement / labral stressMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Moderate · CompensatedMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Grade 3Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
FAI / labral failureMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Severe · Chain DisruptionMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
PRIMARYMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
DRIVERMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Mild femoral-head positional drift · centredMap this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
under load · balanced³·⁷Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
Repetitive end-range load · morphology (cam/Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.
pincer) · early impingement¹·²Map this line to the driver-compensation-consequence loop, then check whether symptoms match the mechanical pathway.

MSc synthesis: In Grade 3, the question changes from “which exercise fixes this?” to “what is the safest sequence of confirmation, referral, load management, symptom protection, mechanical re-education and long-term re-test?”

Clinical assessment protocol and threshold discipline

The source card lists validated or clinically repeatable tests. The MSc standard is to treat each test as a data point with method, side, value, symptom response, reliability and re-test timing. Do not use a single postural snapshot to claim causation.

Assessment / source elementMSc interpretationDecision use
Six validated tests · Normal values · MDC thresholds · Red-flag screenUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Screen/referral
ASSESSMENTUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Screen/referral
METHOD / TOOLUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
NORMAL /Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
TARGETUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
CLINICALUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
THRESHOLDUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
FADIR impingementUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
Flexion-adduction-IRUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
test⁵Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
NegativeUse this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
Groin pain =Use this as a measurable anchor rather than a visual impression. Record the tool, side, value, symptom response and confidence.Baseline, grade and re-test
Data-capture rule: write the baseline value, the target/normal value, the clinical threshold, and the immediate post-correction value. This makes the module teachable, auditable and clinically defensible.
Assessment source excerpt — source-card excerpt
Six validated tests · Normal values · MDC thresholds · Red-flag screen ASSESSMENT METHOD / TOOL NORMAL / TARGET CLINICAL THRESHOLD FADIR impingement Flexion-adduction-IR test⁵ Negative Groin pain = FAI / labral⁵ Hip ROM Goniometry — flexion / IR⁹ Flex 120° · IR 35° Restricted IR = impingement⁶ Gluteal strength MMT / dynamometry abd-ext⁸·¹⁰ Strong · symmetric Weak = force- couple fault¹⁰ Single-leg control Stance / step-down⁸ Level pelvis Trendelenburg = control fault⁸ Labral load FABER / scour⁵ Negative Pain = intra- articular⁵ Morphology Imaging (α-angle, coverage)¹·² Normal offset Cam / pincer = FAI¹·²

Red flags, exclusion criteria and referral before correction

Posture education is only credible when the safety screen comes before the correction plan. Red flags in the source cards are not decorative; they define when the module must stop and referral or co-management must occur.

Source-card red flags

  • Acute trauma + inability to weight-bear / shortened-rotated limb — hip fracture or dislocation (emergency)
  • Child / adolescent with hip or knee pain + limp — SUFE / Perthes (urgent imaging)
  • Hot, swollen hip + fever — septic arthritis (emergency)
  • Night pain + weight loss + malignancy history — tumour / metastasis screen
  • Groin pain + steroid / alcohol use or deep rest pain — avascular necrosis workup
Safety tierActionDocumentation
EmergencyStop correction and refer urgently.Record symptom, onset, neurological/systemic signs and referral advice.
Medical workupDo not load aggressively until diagnosis or clearance.Record rationale and communication.
Conservative correction allowedProceed only when red flags are negative and driver is confirmed.Record baseline, intervention and re-test.

BPIT™ 5-Line correction sequence

The BPIT™ sequence is the correction spine of the LMS. It keeps the practitioner from jumping directly to exercises before confirming the mechanical driver. In every module, the order is: identify the driver, restore the missing mechanical option, activate control, load the corrected pattern, and habituate it into life or sport.

Line 1: Identify Driver

Identify Driver NEEBAL™ 3-gate test · confirm hip source via FADIR & ROM · classify per Warwick FAI consensus &

Line 2: Restore Mobility

CPG²·¹³ Line 2 Restore Mobility Restore pain-free flexion & internal

Line 3: Activate Control

rotation within morphological limits · reduce provocative end-range load⁹ Line 3 Activate Glutes

Line 4: Load & Correct

Gluteal & deep-rotator strengthening to centre the femoral head & balance the force-couple⁸·¹⁰ Line 4

Line 5: Habituate

Load & Correct Progressive hip-dominant loading · single-leg & hinge control below impingement range · re-test FADIR

Correction rule: If Line 1 is wrong, Lines 2–5 may improve symptoms temporarily while missing the source of recurrence. Driver confirmation is therefore the credibility anchor of the method.
BPIT correction source excerpt — source-card excerpt
Identify Driver NEEBAL™ 3-gate test · confirm hip source via FADIR & ROM · classify per Warwick FAI consensus & CPG²·¹³ Line 2 Restore Mobility Restore pain-free flexion & internal rotation within morphological limits · reduce provocative end-range load⁹ Line 3 Activate Glutes Gluteal & deep-rotator strengthening to centre the femoral head & balance the force-couple⁸·¹⁰ Line 4 Load & Correct Progressive hip-dominant loading · single-leg & hinge control below impingement range · re-test FADIR & strength¹² Line 5 Habituate Squat / hinge depth matched to morphology · sport-specific hip control · load management & monitoring¹³ Evidence: gluteal function & hip stability⁸ Evidence: FAI muscle weakness¹⁰ Consensus: Warwick FAI² BPIT™ DOI 10.5281/zenodo.17594977

Figure laboratory and illustration placeholder

HIP — Femoroacetabular Joint

Replaceable file: figures/POST-CARD-17-HIP-FIGURE.jpg

The original card specifies a 4 × 6 inch portrait anatomical plate. This LMS package includes a same-name JPG placeholder that can be replaced by the final illustration without editing the HTML.

Figure requirementModule instruction
FilenamePOST-CARD-17-HIP-FIGURE.jpg
Original AI filenamePOST-CARD-17-HIP-FIGURE.ai
Figure titleHIP — Femoroacetabular Joint
Design noteshow the femoral head centred by the gluteal force-couple with the labral seal intact — annotate cam / pincer morphology and the FADIR impingement contact in house gold, contrasting a centred head against an impinging / mis-centred one.
Figure placeholder source excerpt — source-card excerpt
ILLUSTRATION PLACEHOLDER — HUMAN FIGURE 4 × 6 inch · 102 mm × 152 mm · 300 dpi · line-art + house colours HIP — Femoroacetabular Joint · Coronal / lateral view — femoral head in acetabulum · Cam vs pincer morphology & α-angle · Acetabular labrum & suction seal · Gluteal / deep-rotator force-couple · FADIR impingement position · Head-centring vs anterior-glide · Load-transfer path to spine & knee

Case application: driver-first reasoning lab

This case laboratory turns the reference card into a teachable clinical workflow. Use it for student discussion, practical assessment or website-based continuing education.

Select values to generate a decision tier.
  1. Screen: rule out the source-card red flags.
  2. Measure: take the most repeatable test from the assessment protocol.
  3. Locate: decide whether this region is the driver, a compensation or a consequence.
  4. Correct: apply BPIT™ in sequence.
  5. Re-test: confirm change with the same measure and a functional task.
Student task: Write a one-paragraph decision note: “The primary driver appears to be ___ because ___; the grade is ___ because ___; the first correction target is ___; the re-test marker is ___.”

Flowchart, knowledge check and application quiz

The flowchart below summarises the LMS logic. It is intentionally the same across modules so learners can build a consistent MMSx decision habit while adapting the details to each anatomical region.

Screenred flags firstLocatedriver regionGrade1 · 2 · 3CorrectBPIT 5-LineRe-testThe Hip — Femoroacetabular Joint: change the mechanics, then prove the change with re-testing.
Question 1. Why is driver confirmation required before correction?
Because symptoms may appear at a compensation site. Correction should target the region generating the mechanical fault, then verify change with re-testing.
Question 2. What makes a Grade 2 presentation different from Grade 1?
Grade 2 shows more measurable deviation and compensation across adjacent control or load systems; it demands stronger assessment, correction sequencing and monitoring.
Question 3. When should this module stop and refer?
When any source-card red flag is present, when neurological/systemic signs emerge, or when Grade 3 features require diagnostic clarification before loading.

References, citations and authenticity audit trail

Source: Posture Science Reference Cards ALL 24.pdf, pages 33-34. The references below were extracted and normalised from the module’s source card. Keep them visible on the website so every module carries its own citation trail.

Module references

  1. [1] Ganz R, et al. (2003). Femoroacetabular impingement: a cause for osteoarthritis of the hip. Clin Orthop Relat Res, 417, 112–120.
  2. [2] Griffin DR, et al. (2016). The Warwick Agreement on femoroacetabular impingement syndrome (FAI): an international consensus statement. Br J Sports Med, 50(19), 1169–1176.
  3. [3] Neumann DA. (2010). Kinesiology of the hip: a focus on muscular actions. J Orthop Sports Phys Ther, 40(2), 82–94.
  4. [4] Lewis CL, Sahrmann SA. (2006). Acetabular labral tears. Phys Ther, 86(1), 110–121.
  5. [5] Reiman MP, et al. (2015). Diagnostic accuracy of clinical tests for the diagnosis of hip femoroacetabular impingement / labral tears. Br J Sports Med, 49(12), 811.
  6. [6] Kemp JL, et al. (2015). Hip-related pain: patterns of impairment and clinical presentation. Br J Sports Med, 49(4), 230–242.
  7. [7] Retchford TH, et al. (2013). Can local muscles augment stability in the hip? A narrative literature review. J Musculoskelet Neuronal Interact, 13(1), 1–12.
  8. [8] Ganderton C, et al. (2018). Gluteal muscle function and hip stability. Phys Ther Sport, 30, 55–63.
  9. [9] Reiman MP, Matheson JW. (2013). Restricted hip mobility: clinical suggestions for self-mobilisation and muscle re-education. Int J Sports Phys Ther, 8(5), 729–740.
  10. [10] Casartelli NC, et al. (2011). Hip muscle weakness in patients with symptomatic femoroacetabular impingement. Osteoarthritis Cartilage, 19(7), 816–821.
  11. [11] Ferguson SJ, et al. (2003). The acetabular labrum seal: a poroelastic finite-element model. Clin Biomech, 18(6), 512–518.
  12. [12] Freke MD, et al. (2016). Physical impairments in symptomatic femoroacetabular impingement: a systematic review. Br J Sports Med, 50(19), 1180.
  13. [13] Enseki K, et al. (2014). Nonarthritic hip joint pain: clinical practice guidelines. J Orthop Sports Phys Ther, 44(6), a1–a32.

Evidence facts carried into this module

  • Femoroacetabular impingement — abnormal cam or pincer contact at end-range — is a
  • mechanical cause of labral damage and hip osteoarthritis
  • Ganz R, et al. Clin Orthop Relat Res. 2003;417:112–120.¹
  • FAI syndrome is defined by the triad of symptoms, clinical signs and imaging findings —
  • morphology alone is not diagnosis (Warwick Agreement)
  • Griffin DR, et al. Br J Sports Med. 2016;50(19):1169–1176.²
  • The acetabular labrum forms a suction seal that pressurises joint fluid and protects cartilage —
  • losing it changes load distribution
  • Ferguson SJ, et al. Clin Biomech. 2003;18(6):512–518.¹¹
  • Patients with symptomatic FAI show measurable hip-muscle weakness — the deficit is
  • neuromuscular as well as structural
  • Casartelli NC, et al. Osteoarthritis Cartilage. 2011;19(7):816–821.¹⁰
  • Hip muscular action centres the femoral head and stabilises the joint through range — control,
  • not just cartilage, governs load
  • Neumann DA. J Orthop Sports Phys Ther. 2010;40(2):82–94.³
  • Clinical tests such as FADIR are sensitive for hip / labral pathology — a practical first-line
Credibility note: This LMS module is an educational synthesis, not a medical diagnosis. Before formal journal publication, verify bibliographic metadata, page ranges and DOI links against primary databases. For website education, the source-card citations and safety screens should remain visible.